Add more checks

[dotfiles.git] / invoke / esptool / tasks.py

diff --git a/invoke/esptool/tasks.py b/invoke/esptool/tasks.py
index 590d70028d53952191d592322a94c8f74df5da3e..96f3b8384351cb73b9164464824b504be1aa6ec6 100644 (file)
--- a/invoke/esptool/tasks.py
+++ b/invoke/esptool/tasks.py
@@ -6,9 +6,17 @@ import os
 HOME = os.path.expanduser('~')
 TODAY = dt.now().strftime('%Y.%m.%d')
 
 HOME = os.path.expanduser('~')
 TODAY = dt.now().strftime('%Y.%m.%d')
 

+# Examples for CardputerAdv
+DEVICE = 'Espressif'
+PORT='/dev/ttyACM0' # Linux
+CHIP='ESP32-S3'
+# PORT='COM0' # Windows
+

 @task
 def help(c):
     '''
 @task
 def help(c):
     '''

+    On using this tasks file
+

     - Set the Cardputer Adv power to 'off' state
     - Plugging in to USB will cause it to boot
     - Hold 'Go' while booting
     - Set the Cardputer Adv power to 'off' state
     - Plugging in to USB will cause it to boot
     - Hold 'Go' while booting


@@ -16,12 +24,22 @@ def help(c):
     - On success, the usual screen content still shows up
     > Tip: Be sure to use a cable that can carry data, not just power.
 
     - On success, the usual screen content still shows up
     > Tip: Be sure to use a cable that can carry data, not just power.
 

+    Consider burnin
+    https://github.com/echo-lalia/MicroHydra
+

     '''
     print(help.__doc__)
 
     '''
     print(help.__doc__)
 

+@task
+def groups(c):
+    '''Check that the current user is a member of dialout'''
+    result = c.run(f'groups {os.getlogin()}')
+    assert 'dialout' in result.stdout
+    print('ok')

 
 @task
 def usbdiff(c):
 
 @task
 def usbdiff(c):

+    '''Use lsusb to try to find the new device.'''

     input('Un-plug in the device...')
     c.run('lsusb > /tmp/before.txt')
     input('Plug in the device...')
     input('Un-plug in the device...')
     c.run('lsusb > /tmp/before.txt')
     input('Plug in the device...')


@@ -32,14 +50,39 @@ def usbdiff(c):
 
 # Maybe https://thelastoutpostworkshop.github.io/ESPConnect/ in Chromium?
 
 
 # Maybe https://thelastoutpostworkshop.github.io/ESPConnect/ in Chromium?
 

-DEV='/dev/ttyACM0'
+
+@task
+def check_conn(c):
+    result = c.run(f'lsusb | grep {DEVICE}')
+    assert DEVICE in result.stdout
+    print('[ok]')

 
 @task
 def listusb(c):
 
 @task
 def listusb(c):

-    c.run('ls /dev/ttyACM*')
+    # result = c.run('ls /dev/ttyACM*')
+    result = c.run(f'ls {PORT}')
+    assert result.ok
+    print('[ok]')

     # c.run('ls /dev/ttyUSB*')
 
     # c.run('ls /dev/ttyUSB*')
 

-@task()
+@task

 def chip_id(c):
 def chip_id(c):

-    c.run(f'esptool --port {DEV} chip-id')
+    result = c.run(f'esptool --port {PORT} chip-id')
+    assert CHIP in result.stdout
+    print('[ok]')
+
+@task
+def check_all(c):
+    listusb(c)
+    check_conn(c)
+    chip_id(c)

 
 

+@task
+def erase_flash(c):
+    '''Erasing flash is recommended before flashing fresh.'''
+    c.run(f'esptool --port {PORT} erase-flash')
+
+@task
+def write_flash(c, filepath):
+    '''Write flash'''
+    c.run(f'esptool --chip {CHIP} --port {PORT} --baud 460800 write_flash -z 0x1000 {filepath}')