Organize things a bit.

diff --git a/README.md b/README.md
index 9bc6316e47c8b97dc205947cf17e74018646aa25..9f84f2319d920d521c061b3d0c997807c85cb66c 100644 (file)
--- a/README.md
+++ b/README.md
@@ -3,109 +3,11 @@
 EdTheDev's Linux and Windows dot files. 
 These are shared so that I can easily share a link to a tip or trick.
 
 EdTheDev's Linux and Windows dot files. 
 These are shared so that I can easily share a link to a tip or trick.
 

-## Getting Started - Windows
+## Getting Started

 
 

-> Note: Bookmark this guide. You're going to reboot at least a few times.
-
-Optional - change host name
-```
-Rename-Computer -NewName FOOOOOOO -Restart
-```
-
-1. [Install chocolatey](https://chocolatey.org/install)
-
-2. Tell `choco` to watch for reboots, as this is Windows.
-```
-choco feature enable -name=exitOnRebootDetected
-```
-
-3. Install a decent terminal. This invokes a bunch of KBs.
-```powershell
-choco install microsoft-windows-terminal # reboot after
-```
-
-3. Set dark theme (non-admin prompt)
-```
-Set-ItemProperty -Path HKCU:\SOFTWARE\Microsoft\Windows\CurrentVersion\Themes\Personalize -Name AppsUseLightTheme -Value 0
-```
-
-4. Reboot after first setup - you may see errors in `choco` commands otherwise.
-5. Set the PC time zone correctly - otherwise expect an install error in later `choco` commands.
-
-4. More packages
-```
-choco install git 
-choco install vscode
-choco install powertoys # reboot after
-```
-
-```
-git clone https://github.com/edthedev/dotfiles.git
-cd dotfiles
-code .
-```
-
-Admin prompt:
-```
-Set-ExecutionPolicy -ExecutionPolicy RemoteSigned
-```
-
-Install VSCode plugins:
-```
-.\setup\code-plugins.ps1
-```
-
-Set git username.
-```
-git config --global user.email "edward@delaporte.us"
-git config --global user.name "Edward Delaporte"
-```
-
-## Getting Started - Raspberyy Pi
-
-### Get Online
-
-```sh
-rasppi-config
-```
-
-+ Set up wireless
-+ Set keyboard location
-
-### Clone this repository
-
-```sh
-sudo apt-get install git
-git clone https://github.com/edthedev/dotfiles.git
-```
-
-### Create a new user
-
-```sh
-sudo useradd bob -m -G sudo
-sudo passwd bob
-sudo passwd pi
-```
-
-### Boostrap CLI
-
-```
-sudo ./install_cli_basics.sh
-```
-
-## Installations
-
-See the `\install` folder for scripts to install various handy utilities. Most of these rely on `Apt` on Linux, or `Chocolatey` on Windows.
-
-## Setups
-
-See the `\setup` folder for configurations.
-These are, obviously, just my preferred configurations.
-
-In general, these work by setting up symlinks on Linux, and on Windows by copying a stub file that sources the versioned file. 
-
-Most of these are cross platform `.ps1` files that run under PowerShell.
++ [Windows](/start_windows.md)
++ [Raspberry Pi](/start_pi.md)

 
 ## Further Reading
 
 
 ## Further Reading
 

-See `i3.md` for info on setting up the I3 window manager.
+See `pi/i3.md` for info on setting up the I3 window manager on Raspberry Pi.

diff --git a/start_pi.md b/start_pi.md
new file mode 100644 (file)
index 0000000..c17f950
--- /dev/null
+++ b/start_pi.md
@@ -0,0 +1,44 @@
+## Getting Started - Raspberyy Pi
+
+### Get Online
+
+```sh
+rasppi-config
+```
+
++ Set up wireless
++ Set keyboard location
+
+### Clone this repository
+
+```sh
+sudo apt-get install git
+git clone https://github.com/edthedev/dotfiles.git
+```
+
+### Create a new user
+
+```sh
+sudo useradd bob -m -G sudo
+sudo passwd bob
+sudo passwd pi
+```
+
+### Boostrap CLI
+
+```
+sudo ./install_cli_basics.sh
+```
+
+## Installations
+
+See the `\install` folder for scripts to install various handy utilities. Most of these rely on `Apt` on Linux, or `Chocolatey` on Windows.
+
+## Setups
+
+See the `\setup` folder for configurations.
+These are, obviously, just my preferred configurations.
+
+In general, these work by setting up symlinks on Linux, and on Windows by copying a stub file that sources the versioned file. 
+
+Most of these are cross platform `.ps1` files that run under PowerShell.

diff --git a/start_windows.md b/start_windows.md
new file mode 100644 (file)
index 0000000..539194e
--- /dev/null
+++ b/start_windows.md
@@ -0,0 +1,58 @@
+
+## Getting Started - Windows
+
+> Note: Bookmark this guide. You're going to reboot at least a few times.
+
+Optional - change host name
+```
+Rename-Computer -NewName FOOOOOOO -Restart
+```
+
+1. [Install chocolatey](https://chocolatey.org/install)
+
+2. Tell `choco` to watch for reboots, as this is Windows.
+```
+choco feature enable -name=exitOnRebootDetected
+```
+
+3. Install a decent terminal. This invokes a bunch of KBs.
+```powershell
+choco install microsoft-windows-terminal # reboot after
+```
+
+3. Set dark theme (non-admin prompt)
+```
+Set-ItemProperty -Path HKCU:\SOFTWARE\Microsoft\Windows\CurrentVersion\Themes\Personalize -Name AppsUseLightTheme -Value 0
+```
+
+4. Reboot after first setup - you may see errors in `choco` commands otherwise.
+5. Set the PC time zone correctly - otherwise expect an install error in later `choco` commands.
+
+4. More packages
+```
+choco install git 
+choco install vscode
+choco install powertoys # reboot after
+```
+
+```
+git clone https://github.com/edthedev/dotfiles.git
+cd dotfiles
+code .
+```
+
+Admin prompt:
+```
+Set-ExecutionPolicy -ExecutionPolicy RemoteSigned
+```
+
+Install VSCode plugins:
+```
+.\setup\code-plugins.ps1
+```
+
+Set git username.
+```
+git config --global user.email "edward@delaporte.us"
+git config --global user.name "Edward Delaporte"
+```